- Qt 6.5
- Qt Quick Controls
- QML Types
- StackView
- Qt 6.5.2 Reference Documentation

# StackView QML Type

Provides a stack-based navigation model. More...

Import Statement: | import QtQuick.Controls
Inherits: | Control

- List of all members, including inherited members

## Properties

- busy : bool
- currentItem : Item
- depth : int
- empty : bool
- initialItem : var
- popEnter : Transition
- popExit : Transition
- pushEnter : Transition
- pushExit : Transition
- replaceEnter : Transition
- replaceExit : Transition

## Attached Properties

- index : int
- status : enumeration
- view : StackView
- visible : bool

## Attached Signals

- activated()
- activating()
- deactivated()
- deactivating()
- removed()

## Methods

- void clear(transition)
- Item find(callback, behavior)
- Item get(index, behavior)
- Item pop(item, operation)
- Item push(item, properties, operation)
- Item replace(target, item, properties, operation)

## Detailed Description

StackView can be used with a set of inter-linked information pages. For example, an email application with separate views to list the latest emails, view a specific email, and list/view the attachments. The email list view is pushed onto the stack as users open an email, and popped out as they choose to go back.

The following snippet demonstrates a simple use case, where the `mainView` is pushed onto and popped out of the stack on relevant button click:

     ApplicationWindow {
         title: qsTr("Hello World")
         width: 640
         height: 480
         visible: true

         StackView {
             id: stack
             initialItem: mainView
             anchors.fill: parent
         }

         Component {
             id: mainView

             Row {
                 spacing: 10

                 Button {
                     text: "Push"
                     onClicked: stack.push(mainView)
                 }
                 Button {
                     text: "Pop"
                     enabled: stack.depth > 1
                     onClicked: stack.pop()

                 }
                 Text {
                     text: stack.depth
                 }
             }
         }
     }

## Using StackView in an Application

Using StackView in an application is as simple as adding it as a child to a Window. The stack is usually anchored to the edges of the window, except at the top or bottom where it might be anchored to a status bar, or some other similar UI component. The stack can then be used by invoking its navigation methods. The first item to show in the StackView is the one that was assigned to initialItem, or the topmost item if initialItem is not set.

## Basic Navigation

StackView supports three primary navigation operations: push(), pop(), and replace(). These correspond to classic stack operations where "push" adds an item to the top of a stack, "pop" removes the top item from the stack, and "replace" is like a pop followed by a push, which replaces the topmost item with the new item. The topmost item in the stack corresponds to the one that is currently visible on screen. Logically, "push" navigates forward or deeper into the application UI, "pop" navigates backward, and "replace" replaces the currentItem.

### Pushing Items

In the following animation, three Label controls are pushed onto a stack view with the push() function:

The stack now contains the following items: `[A, B, C]`.

Note: When the stack is empty, a push() operation will not have a transition animation because there is nothing to transition from (typically on application start-up).

### Popping Items

Continuing on from the example above, the topmost item on the stack is removed with a call to pop():

The stack now contains the following items: `[A, B]`.

Note: A pop() operation on a stack with depth 1 or 0 does nothing. In such cases, the stack can be emptied using the clear() method.

#### Unwinding Items via Pop

Sometimes, it is necessary to go back more than a single step in the stack. For example, to return to a "main" item or some kind of section item in the application. In such cases, it is possible to specify an item as a parameter for pop(). This is called an "unwind" operation, where the stack unwinds till the specified item. If the item is not found, stack unwinds until it is left with one item, which becomes the currentItem. To explicitly unwind to the bottom of the stack, it is recommended to use pop(null), although any non-existent item will do.

In the following animation, we unwind the stack to the first item by calling `pop(null)`:

The stack now contains a single item: `[A]`.

### Replacing Items

In the following animation, we replace the topmost item with `D`:

The stack now contains the following items: `[A, B, D]`.

## Deep Linking

Deep linking means launching an application into a particular state. For example, a newspaper application could be launched into showing a particular article, bypassing the topmost item. In terms of StackView, deep linking means the ability to modify the state of the stack, so much so that it is possible to push a set of items to the top of the stack, or to completely reset the stack to a given state.

The API for deep linking in StackView is the same as for basic navigation. Pushing an array instead of a single item adds all the items in that array to the stack. The transition animation, however, is applied only for the last item in the array. The normal semantics of push() apply for deep linking, that is, it adds whatever is pushed onto the stack.

Note: Only the last item of the array is loaded. The rest of the items are loaded only when needed, either on subsequent calls to pop or on request to get an item using get().

This gives us the following result, given the stack [A, B, C]:

- push([D, E, F]) => [A, B, C, D, E, F] - "push" transition animation between C and F
- replace([D, E, F]) => [A, B, D, E, F] - "replace" transition animation between C and F
- clear() followed by push([D, E, F]) => [D, E, F] - no transition animation for pushing items as the stack was empty.

## Finding Items

An Item for which the application does not have a reference can be found by calling find(). The method needs a callback function, which is invoked for each item in the stack (starting at the top) until a match is found. If the callback returns `true`, find() stops and returns the matching item, otherwise `null` is returned.

The code below searches the stack for an item named "order_id" and unwinds to that item.

     stackView.pop(stackView.find(function(item) {
         return item.name == "order_id";
     }));

You can also get to an item in the stack using get(index).

     previousItem = stackView.get(myItem.StackView.index - 1));

## Transitions

For each push or pop operation, different transition animations are applied to entering and exiting items. These animations define how the entering item should animate in, and the exiting item should animate out. The animations can be customized by assigning different Transitions for the pushEnter, pushExit, popEnter, popExit, replaceEnter, and replaceExit properties of StackView.

Note: The transition animations affect each others' transitional behavior. Customizing the animation for one and leaving the other may give unexpected results.

The following snippet defines a simple fade transition for push and pop operations:

     StackView {
         id: stackview
         anchors.fill: parent

         pushEnter: Transition {
             PropertyAnimation {
                 property: "opacity"
                 from: 0
                 to:1
                 duration: 200
             }
         }
         pushExit: Transition {
             PropertyAnimation {
                 property: "opacity"
                 from: 1
                 to:0
                 duration: 200
             }
         }
         popEnter: Transition {
             PropertyAnimation {
                 property: "opacity"
                 from: 0
                 to:1
                 duration: 200
             }
         }
         popExit: Transition {
             PropertyAnimation {
                 property: "opacity"
                 from: 1
                 to:0
                 duration: 200
             }
         }
     }

Note: Using anchors on the items added to a StackView is not supported. Typically push, pop, and replace transitions animate the position, which is not possible when anchors are applied. Notice that this only applies to the root of the item. Using anchors for its children works as expected.

## Item Ownership

StackView only takes ownership of items that it creates itself. This means that any item pushed onto a StackView will never be destroyed by the StackView; only items that StackView creates from Components or URLs are destroyed by the StackView. To illustrate this, the messages in the example below will only be printed when the StackView is destroyed, not when the items are popped off the stack:

     Component {
         id: itemComponent

         Item {
             Component.onDestruction: print("Destroying second item")
         }
     }

     StackView {
         initialItem: Item {
             Component.onDestruction: print("Destroying initial item")
         }

         Component.onCompleted: push(itemComponent.createObject(window))
     }

However, both of the items created from the URL and Component in the following example will be destroyed by the StackView when they are popped off of it:

     Component {
         id: itemComponent

         Item {
             Component.onDestruction: print("Destroying second item")
         }
     }

     StackView {
         initialItem: "Item1.qml"

         Component.onCompleted: push(itemComponent)
     }

## Size

StackView does not inherit an implicit size from items that are pushed onto it. This means that using it as the contentItem of a Dialog, for example, will not work as expected:

     Dialog {
         StackView {
             initialItem: Rectangle {
                 width: 200
                 height: 200
                 color: "salmon"
             }
         }
     }

There are several ways to ensure that StackView has a size in this situation:

- Set implicitWidth and implicitHeight on the StackView itself.
- Set implicitWidth and implicitHeight on the Rectangle.
- Set contentWidth and contentHeight on the Dialog.
- Give the Dialog a size.

See also Customizing StackView, Navigating with StackView, Navigation Controls, Container Controls, and Focus Management in Qt Quick Controls.

## Property Documentation

[read-only] busy : bool

This property holds whether a transition is running.

[read-only] currentItem : Item

This property holds the current top-most item in the stack.

[read-only] depth : int

This property holds the number of items currently pushed onto the stack.

[read-only, since QtQuick.Controls 2.3 (Qt 5.10)] empty : bool

This property holds whether the stack is empty.

This property was introduced in QtQuick.Controls 2.3 (Qt 5.10).

See also depth.

initialItem : var

This property holds the initial item that should be shown when the StackView is created. The initial item can be an Item, Component, or a url. Specifying an initial item is equivalent to:

     Component.onCompleted: stackView.push(myInitialItem)

See also push().

popEnter : Transition

This property holds the transition that is applied to the item that enters the stack when another item is popped off of it.

See also Customizing StackView.

popExit : Transition

This property holds the transition that is applied to the item that exits the stack when the item is popped off of it.

See also Customizing StackView.

pushEnter : Transition

This property holds the transition that is applied to the item that enters the stack when the item is pushed onto it.

See also Customizing StackView.

pushExit : Transition

This property holds the transition that is applied to the item that exits the stack when another item is pushed onto it.

See also Customizing StackView.

replaceEnter : Transition

This property holds the transition that is applied to the item that enters the stack when another item is replaced by it.

See also Customizing StackView.

replaceExit : Transition

This property holds the transition that is applied to the item that exits the stack when it is replaced by another item.

See also Customizing StackView.

## Attached Property Documentation

[read-only] StackView.index : int

This attached property holds the stack index of the item it's attached to, or `-1` if the item is not in a stack.

[read-only] StackView.status : enumeration

This attached property holds the stack status of the item it's attached to, or `StackView.Inactive` if the item is not in a stack.

Available values:

Constant | Description
--- | ---
`StackView.Inactive` | The item is inactive (or not in a stack).
`StackView.Deactivating` | The item is being deactivated (popped off).
`StackView.Activating` | The item is being activated (becoming the current item).
`StackView.Active` | The item is active, that is, the current item.

[read-only] StackView.view : StackView

This attached property holds the stack view of the item it's attached to, or `null` if the item is not in a stack.

[since QtQuick.Controls 2.2 (Qt 5.9)] StackView.visible : bool

This attached property holds the visibility of the item it's attached to. The value follows the value of Item::visible.

By default, StackView shows incoming items when the enter transition begins, and hides outgoing items when the exit transition ends. Setting this property explicitly allows the default behavior to be overridden, making it possible to keep items that are below the top-most item visible.

Note: The default transitions of most styles slide outgoing items outside the view, and may also animate their opacity. In order to keep a full stack of items visible, consider customizing the transitions so that the items underneath can be seen.

     StackView {
         id: stackView
         property real offset: 10
         width: 100; height: 100

         initialItem: Component {
             id: page
             Rectangle {
                 property real pos: StackView.index * stackView.offset
                 property real hue: Math.random()
                 color: Qt.hsla(hue, 0.5, 0.8, 0.6)
                 border.color: Qt.hsla(hue, 0.5, 0.5, 0.9)
                 StackView.visible: true
             }
         }

         pushEnter: Transition {
             id: pushEnter
             ParallelAnimation {
                 PropertyAction { property: "x"; value: pushEnter.ViewTransition.item.pos }
                 NumberAnimation { properties: "y"; from: pushEnter.ViewTransition.item.pos + stackView.offset; to: pushEnter.ViewTransition.item.pos; duration: 400; easing.type: Easing.OutCubic }
                 NumberAnimation { property: "opacity"; from: 0; to: 1; duration: 400; easing.type: Easing.OutCubic }
             }
         }
         popExit: Transition {
             id: popExit
             ParallelAnimation {
                 PropertyAction { property: "x"; value: popExit.ViewTransition.item.pos }
                 NumberAnimation { properties: "y"; from: popExit.ViewTransition.item.pos; to: popExit.ViewTransition.item.pos + stackView.offset; duration: 400; easing.type: Easing.OutCubic }
                 NumberAnimation { property: "opacity"; from: 1; to: 0; duration: 400; easing.type: Easing.OutCubic }
             }
         }

         pushExit: Transition {
             id: pushExit
             PropertyAction { property: "x"; value: pushExit.ViewTransition.item.pos }
             PropertyAction { property: "y"; value: pushExit.ViewTransition.item.pos }
         }
         popEnter: Transition {
             id: popEnter
             PropertyAction { property: "x"; value: popEnter.ViewTransition.item.pos }
             PropertyAction { property: "y"; value: popEnter.ViewTransition.item.pos }
         }
     }

This property was introduced in QtQuick.Controls 2.2 (Qt 5.9).

## Attached Signal Documentation

`[since QtQuick.Controls 2.1 (Qt 5.8)]` activated()

This attached signal is emitted when the item it's attached to is activated in the stack.

Note: The corresponding handler is `onActivated`.

This signal was introduced in QtQuick.Controls 2.1 (Qt 5.8).

See also status.

`[since QtQuick.Controls 2.1 (Qt 5.8)]` activating()

This attached signal is emitted when the item it's attached to is in the process of being activated in the stack.

Note: The corresponding handler is `onActivating`.

This signal was introduced in QtQuick.Controls 2.1 (Qt 5.8).

See also status.

`[since QtQuick.Controls 2.1 (Qt 5.8)]` deactivated()

This attached signal is emitted when the item it's attached to is deactivated in the stack.

Note: The corresponding handler is `onDeactivated`.

This signal was introduced in QtQuick.Controls 2.1 (Qt 5.8).

See also status.

`[since QtQuick.Controls 2.1 (Qt 5.8)]` deactivating()

This attached signal is emitted when the item it's attached to is in the process of being dectivated in the stack.

Note: The corresponding handler is `onDeactivating`.

This signal was introduced in QtQuick.Controls 2.1 (Qt 5.8).

See also status.

`[since QtQuick.Controls 2.1 (Qt 5.8)]` removed()

This attached signal is emitted when the item it's attached to has been removed from the stack. It can be used to safely destroy an Item that was pushed onto the stack, for example:

     Item {
         StackView.onRemoved: destroy() // Will be destroyed sometime after this call.
     }

Note: The corresponding handler is `onRemoved`.

This signal was introduced in QtQuick.Controls 2.1 (Qt 5.8).

See also status.

## Method Documentation

void clear(transition)

Removes all items from the stack.

Only items that StackView created itself (from a Component or url) will be destroyed when popped. See Item Ownership for more information.

Since QtQuick.Controls 2.3, a transition can be optionally specified. Supported transitions:

Constant | Description
--- | ---
`StackView.Immediate` | Clear the stack immediately without any transition (default).
`StackView.PushTransition` | Clear the stack with a push transition.
`StackView.ReplaceTransition` | Clear the stack with a replace transition.
`StackView.PopTransition` | Clear the stack with a pop transition.

Item find(callback, behavior)

Search for a specific item inside the stack. The callback function is called for each item in the stack (with the item and index as arguments) until the callback function returns `true`. The return value is the item found. For example:

     stackView.find(function(item, index) {
         return item.isTheOne
     })

Supported behavior values:

Constant | Description
--- | ---
`StackView.DontLoad` | Unloaded items are skipped (the callback function is not called for them).
`StackView.ForceLoad` | Unloaded items are forced to load.

Item get(index, behavior)

Returns the item at position index in the stack, or `null` if the index is out of bounds.

Supported behavior values:

Constant | Description
--- | ---
`StackView.DontLoad` | The item is not forced to load (and `null` is returned if not yet loaded).
`StackView.ForceLoad` | The item is forced to load.

Item pop(item, operation)

Pops one or more items off the stack. Returns the last item removed from the stack.

If the item argument is specified, all items down to (but not including) item will be popped. If item is `null`, all items down to (but not including) the first item is popped. If not specified, only the current item is popped.

Note: A pop() operation on a stack with depth 1 or 0 does nothing. In such cases, the stack can be emptied using the clear() method.

Only items that StackView created itself (from a Component or url) will be destroyed when popped. See Item Ownership for more information.

An operation can be optionally specified as the last argument. Supported operations:

Constant | Description
--- | ---
`StackView.Immediate` | An immediate operation without transitions.
`StackView.PushTransition` | An operation with push transitions (since QtQuick.Controls 2.1).
`StackView.ReplaceTransition` | An operation with replace transitions (since QtQuick.Controls 2.1).
`StackView.PopTransition` | An operation with pop transitions (since QtQuick.Controls 2.1).

If no operation is provided, `PopTransition` will be used.

Examples:

     stackView.pop()
     stackView.pop(someItem, StackView.Immediate)
     stackView.pop(StackView.Immediate)
     stackView.pop(null)

See also clear(), Popping Items, and Unwinding Items via Pop.

Item push(item, properties, operation)

Pushes an item onto the stack using an optional operation, and optionally applies a set of properties on the item. The item can be an Item, Component, or a url. Returns the item that became current.

StackView creates an instance automatically if the pushed item is a Component, or a url, and the instance will be destroyed when it is popped off the stack. See Item Ownership for more information.

The optional properties argument specifies a map of initial property values for the pushed item. For dynamically created items, these values are applied before the creation is finalized. This is more efficient than setting property values after creation, particularly where large sets of property values are defined, and also allows property bindings to be set up (using Qt.binding()) before the item is created.

Pushing a single item:

     stackView.push(rect)

     // or with properties:
     stackView.push(rect, {"color": "red"})

Multiple items can be pushed at the same time either by passing them as additional arguments, or as an array. The last item becomes the current item. Each item can be followed by a set of properties to apply.

Passing a variable amount of arguments:

     stackView.push(rect1, rect2, rect3)

     // or with properties:
     stackView.push(rect1, {"color": "red"}, rect2, {"color": "green"}, rect3, {"color": "blue"})

Pushing an array of items:

     stackView.push([rect1, rect2, rect3])

     // or with properties:
     stackView.push([rect1, {"color": "red"}, rect2, {"color": "green"}, rect3, {"color": "blue"}])

An operation can be optionally specified as the last argument. Supported operations:

Constant | Description
--- | ---
`StackView.Immediate` | An immediate operation without transitions.
`StackView.PushTransition` | An operation with push transitions (since QtQuick.Controls 2.1).
`StackView.ReplaceTransition` | An operation with replace transitions (since QtQuick.Controls 2.1).
`StackView.PopTransition` | An operation with pop transitions (since QtQuick.Controls 2.1).

If no operation is provided, `PushTransition` will be used.

Note: Items that already exist in the stack are not pushed.

See also initialItem and Pushing Items.

Item replace(target, item, properties, operation)

Replaces one or more items on the stack with the specified item and optional operation, and optionally applies a set of properties on the item. The item can be an Item, Component, or a url. Returns the item that became current.

Only items that StackView created itself (from a Component or url) will be destroyed when popped. See Item Ownership for more information.

If the target argument is specified, all items down to the target item will be replaced. If target is `null`, all items in the stack will be replaced. If not specified, only the top item will be replaced.

StackView creates an instance automatically if the replacing item is a Component, or a url. The optional properties argument specifies a map of initial property values for the replacing item. For dynamically created items, these values are applied before the creation is finalized. This is more efficient than setting property values after creation, particularly where large sets of property values are defined, and also allows property bindings to be set up (using Qt.binding()) before the item is created.

Replace the top item:

     stackView.replace(rect)

     // or with properties:
     stackView.replace(rect, {"color": "red"})

Multiple items can be replaced at the same time either by passing them as additional arguments, or as an array. Each item can be followed by a set of properties to apply.

Passing a variable amount of arguments:

     stackView.replace(rect1, rect2, rect3)

     // or with properties:
     stackView.replace(rect1, {"color": "red"}, rect2, {"color": "green"}, rect3, {"color": "blue"})

Replacing an array of items:

     stackView.replace([rect1, rect2, rect3])

     // or with properties:
     stackView.replace([rect1, {"color": "red"}, rect2, {"color": "green"}, rect3, {"color": "blue"}])

An operation can be optionally specified as the last argument. Supported operations:

Constant | Description
--- | ---
`StackView.Immediate` | An immediate operation without transitions.
`StackView.PushTransition` | An operation with push transitions (since QtQuick.Controls 2.1).
`StackView.ReplaceTransition` | An operation with replace transitions (since QtQuick.Controls 2.1).
`StackView.PopTransition` | An operation with pop transitions (since QtQuick.Controls 2.1).

If no operation is provided, `ReplaceTransition` will be used.

The following example illustrates the use of push and pop transitions with replace().

     StackView {
         id: stackView

         initialItem: Component {
             id: page

             Page {
                 Row {
                     spacing: 20
                     anchors.centerIn: parent

                     Button {
                         text: "<"
                         onClicked: stackView.replace(page, StackView.PopTransition)
                     }
                     Button {
                         text: ">"
                         onClicked: stackView.replace(page, StackView.PushTransition)
                     }
                 }
             }
         }
     }

See also push() and Replacing Items.