scenemodifier.cpp Example File | Qt 3D 5.9

Qt 5.9 | Qt 3D | Qt 3D: Basic Shapes C++ Example | scenemodifier.cpp Example File

Qt 5.9.9 Reference Documentation

# scenemodifier.cpp Example File

basicshapes-cpp/scenemodifier.cpp

      /****************************************************************************
      **
      ** Copyright (C) 2014 Klaralvdalens Datakonsult AB (KDAB).
      ** Contact: https://www.qt.io/licensing/
      **
      ** This file is part of the Qt3D module of the Qt Toolkit.
      **
      ** $QT_BEGIN_LICENSE:BSD$
      ** Commercial License Usage
      ** Licensees holding valid commercial Qt licenses may use this file in
      ** accordance with the commercial license agreement provided with the
      ** Software or, alternatively, in accordance with the terms contained in
      ** a written agreement between you and The Qt Company. For licensing terms
      ** and conditions see https://www.qt.io/terms-conditions. For further
      ** information use the contact form at https://www.qt.io/contact-us.
      **
      ** BSD License Usage
      ** Alternatively, you may use this file under the terms of the BSD license
      ** as follows:
      **
      ** "Redistribution and use in source and binary forms, with or without
      ** modification, are permitted provided that the following conditions are
      ** met:
      **   * Redistributions of source code must retain the above copyright
      **     notice, this list of conditions and the following disclaimer.
      **   * Redistributions in binary form must reproduce the above copyright
      **     notice, this list of conditions and the following disclaimer in
      **     the documentation and/or other materials provided with the
      **     distribution.
      **   * Neither the name of The Qt Company Ltd nor the names of its
      **     contributors may be used to endorse or promote products derived
      **     from this software without specific prior written permission.
      **
      **
      ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
      ** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
      ** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
      ** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
      ** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
      ** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
      ** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
      ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
      ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
      ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
      ** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
      **
      ** $QT_END_LICENSE$
      **
      ****************************************************************************/

      #include "scenemodifier.h"

      #include <QtCore/QDebug>

      SceneModifier::SceneModifier(Qt3DCore::QEntity *rootEntity)
          : m_rootEntity(rootEntity)
      {

          // Torus shape data
          m_torus = new Qt3DExtras::QTorusMesh();
          m_torus->setRadius(1.0f);
          m_torus->setMinorRadius(0.4f);
          m_torus->setRings(100);
          m_torus->setSlices(20);

          // TorusMesh Transform
          Qt3DCore::QTransform *torusTransform = new Qt3DCore::QTransform();
          torusTransform->setScale(2.0f);
          torusTransform->setRotation(QQuaternion::fromAxisAndAngle(QVector3D(0.0f, 1.0f, 0.0f), 25.0f));
          torusTransform->setTranslation(QVector3D(5.0f, 4.0f, 0.0f));

          Qt3DExtras::QPhongMaterial *torusMaterial = new Qt3DExtras::QPhongMaterial();
          torusMaterial->setDiffuse(QColor(QRgb(0xbeb32b)));

          // Torus
          m_torusEntity = new Qt3DCore::QEntity(m_rootEntity);
          m_torusEntity->addComponent(m_torus);
          m_torusEntity->addComponent(torusMaterial);
          m_torusEntity->addComponent(torusTransform);

          // Cone shape data
          Qt3DExtras::QConeMesh *cone = new Qt3DExtras::QConeMesh();
          cone->setTopRadius(0.5);
          cone->setBottomRadius(1);
          cone->setLength(3);
          cone->setRings(50);
          cone->setSlices(20);

          // ConeMesh Transform
          Qt3DCore::QTransform *coneTransform = new Qt3DCore::QTransform();
          coneTransform->setScale(1.5f);
          coneTransform->setRotation(QQuaternion::fromAxisAndAngle(QVector3D(1.0f, 0.0f, 0.0f), 45.0f));
          coneTransform->setTranslation(QVector3D(0.0f, 4.0f, -1.5));

          Qt3DExtras::QPhongMaterial *coneMaterial = new Qt3DExtras::QPhongMaterial();
          coneMaterial->setDiffuse(QColor(QRgb(0x928327)));

          // Cone
          m_coneEntity = new Qt3DCore::QEntity(m_rootEntity);
          m_coneEntity->addComponent(cone);
          m_coneEntity->addComponent(coneMaterial);
          m_coneEntity->addComponent(coneTransform);

          // Cylinder shape data
          Qt3DExtras::QCylinderMesh *cylinder = new Qt3DExtras::QCylinderMesh();
          cylinder->setRadius(1);
          cylinder->setLength(3);
          cylinder->setRings(100);
          cylinder->setSlices(20);

          // CylinderMesh Transform
          Qt3DCore::QTransform *cylinderTransform = new Qt3DCore::QTransform();
          cylinderTransform->setScale(1.5f);
          cylinderTransform->setRotation(QQuaternion::fromAxisAndAngle(QVector3D(1.0f, 0.0f, 0.0f), 45.0f));
          cylinderTransform->setTranslation(QVector3D(-5.0f, 4.0f, -1.5));

          Qt3DExtras::QPhongMaterial *cylinderMaterial = new Qt3DExtras::QPhongMaterial();
          cylinderMaterial->setDiffuse(QColor(QRgb(0x928327)));

          // Cylinder
          m_cylinderEntity = new Qt3DCore::QEntity(m_rootEntity);
          m_cylinderEntity->addComponent(cylinder);
          m_cylinderEntity->addComponent(cylinderMaterial);
          m_cylinderEntity->addComponent(cylinderTransform);

          // Cuboid shape data
          Qt3DExtras::QCuboidMesh *cuboid = new Qt3DExtras::QCuboidMesh();

          // CuboidMesh Transform
          Qt3DCore::QTransform *cuboidTransform = new Qt3DCore::QTransform();
          cuboidTransform->setScale(4.0f);
          cuboidTransform->setTranslation(QVector3D(5.0f, -4.0f, 0.0f));

          Qt3DExtras::QPhongMaterial *cuboidMaterial = new Qt3DExtras::QPhongMaterial();
          cuboidMaterial->setDiffuse(QColor(QRgb(0x665423)));

          //Cuboid
          m_cuboidEntity = new Qt3DCore::QEntity(m_rootEntity);
          m_cuboidEntity->addComponent(cuboid);
          m_cuboidEntity->addComponent(cuboidMaterial);
          m_cuboidEntity->addComponent(cuboidTransform);

          // Plane shape data
          Qt3DExtras::QPlaneMesh *planeMesh = new Qt3DExtras::QPlaneMesh();
          planeMesh->setWidth(2);
          planeMesh->setHeight(2);

          // Plane mesh transform
          Qt3DCore::QTransform *planeTransform = new Qt3DCore::QTransform();
          planeTransform->setScale(1.3f);
          planeTransform->setRotation(QQuaternion::fromAxisAndAngle(QVector3D(1.0f, 0.0f, 0.0f), 45.0f));
          planeTransform->setTranslation(QVector3D(0.0f, -4.0f, 0.0f));

          Qt3DExtras::QPhongMaterial *planeMaterial = new Qt3DExtras::QPhongMaterial();
          planeMaterial->setDiffuse(QColor(QRgb(0xa69929)));

          // Plane
          m_planeEntity = new Qt3DCore::QEntity(m_rootEntity);
          m_planeEntity->addComponent(planeMesh);
          m_planeEntity->addComponent(planeMaterial);
          m_planeEntity->addComponent(planeTransform);

          // Sphere shape data
          Qt3DExtras::QSphereMesh *sphereMesh = new Qt3DExtras::QSphereMesh();
          sphereMesh->setRings(20);
          sphereMesh->setSlices(20);
          sphereMesh->setRadius(2);

          // Sphere mesh transform
          Qt3DCore::QTransform *sphereTransform = new Qt3DCore::QTransform();

          sphereTransform->setScale(1.3f);
          sphereTransform->setTranslation(QVector3D(-5.0f, -4.0f, 0.0f));

          Qt3DExtras::QPhongMaterial *sphereMaterial = new Qt3DExtras::QPhongMaterial();
          sphereMaterial->setDiffuse(QColor(QRgb(0xa69929)));

          // Sphere
          m_sphereEntity = new Qt3DCore::QEntity(m_rootEntity);
          m_sphereEntity->addComponent(sphereMesh);
          m_sphereEntity->addComponent(sphereMaterial);
          m_sphereEntity->addComponent(sphereTransform);
      }

      SceneModifier::~SceneModifier()
      {
      }

      void SceneModifier::enableTorus(bool enabled)
      {
          m_torusEntity->setEnabled(enabled);
      }

      void SceneModifier::enableCone(bool enabled)
      {
          m_coneEntity->setEnabled(enabled);
      }

      void SceneModifier::enableCylinder(bool enabled)
      {
          m_cylinderEntity->setEnabled(enabled);
      }

      void SceneModifier::enableCuboid(bool enabled)
      {
          m_cuboidEntity->setEnabled(enabled);
      }

      void SceneModifier::enablePlane(bool enabled)
      {
          m_planeEntity->setEnabled(enabled);
      }

      void SceneModifier::enableSphere(bool enabled)
      {
          m_sphereEntity->setEnabled(enabled);
      }