/****************************************************************************
**
** Copyright (C) 2019 The Qt Company Ltd.
** Contact: https://www.qt.io/licensing/
**
** This file is part of the Qt Creator documentation.
**
** Commercial License Usage
** Licensees holding valid commercial Qt licenses may use this file in
** accordance with the commercial license agreement provided with the
** Software or, alternatively, in accordance with the terms contained in
** a written agreement between you and The Qt Company. For licensing terms
** and conditions see https://www.qt.io/terms-conditions. For further
** information use the contact form at https://www.qt.io/contact-us.
**
** GNU Free Documentation License Usage
** Alternatively, this file may be used under the terms of the GNU Free
** Documentation License version 1.3 as published by the Free Software
** Foundation and appearing in the file included in the packaging of
** this file. Please review the following information to ensure
** the GNU Free Documentation License version 1.3 requirements
** will be met: https://www.gnu.org/licenses/fdl-1.3.html.
**
****************************************************************************/

// **********************************************************************
// NOTE: the sections are not ordered by their logical order to avoid
// reshuffling the file each time the index order changes (i.e., often).
// Run the fixnavi.pl script to adjust the links to the index order.
// **********************************************************************

/*!
    \previouspage creator-project-qmake.html
    \page creator-tool-chains.html
    \nextpage creator-debuggers.html

    \title Adding Compilers

    Qt is supported on a variety of 32-bit and 64-bit platforms, and can
    usually be built on each platform with GCC, a vendor-supplied compiler, or
    a third party compiler. In \QC, a \l{glossary-buildandrun-kit}{kit}
    specifies the compiler and other necessary tools for building an application
    for and running it on a particular platform.

    \QC automatically detects the compilers that are registered by your system
    or by an installer and lists them in \uicontrol Tools > \uicontrol Options >
    \uicontrol Kits > \uicontrol Compilers:

    \image qtcreator-toolchains.png

    You can add the following compilers to build applications by using other
    compilers or by using additional versions of the automatically detected
    compilers:

    \list

        \li GNU Compiler Collection (GCC) is a compiler for Linux and
            \macos.

        \li MinGW (Minimalist GNU for Windows) is a native software port of GCC
            and GNU Binutils for use in the development of native Microsoft
            Windows applications on Windows. MinGW is
            distributed together with \QC and Qt installers for Windows.

        \li ICC (Intel C++ Compiler) is a group of C and C++ compilers.
            Only the GCC-compatible variant, available for Linux and \macos,
            is currently supported by \QC.

        \li Clang is a C, C++, Objective C, and Objective C++ front-end for the
            LLVM compiler for Windows, Linux, and \macos.

        \li \l{https://clang.llvm.org/docs/UsersManual.html#clang-cl}{clang-cl}
            is an alternative command-line interface to Clang that is compatible
            with the Visual C++ compiler, \c cl.exe.

        \li Nim is the Nim Compiler for Windows, Linux, and \macos.

        \li QCC is the interface for compiling C++ applications for QNX.

    \endlist

    In addition, the \QC Bare Metal Device plugin provides support for the
    following compilers:

    \list

        \li \l{https://www.iar.com/iar-embedded-workbench/}{IAREW} is a group of
            C and C++ bare-metal compilers from the various IAR Embedded Workbench
            development environments.
            \note Currently supported architectures are \c 8051, \c AVR, \c ARM,
            \c STM8, and \c MSP430.

        \li \l{https://www.keil.com}{KEIL} is a group of C and C++ bare-metal
            compilers from the various KEIL development environments.
            \note Currently supported architectures are \c 8051 and \c ARM.

        \li \l{https://sdcc.sourceforge.net}{SDCC} is a retargetable, optimizing
            C bare-metal compiler for various architectures.
            \note Currently supported architectures are \c 8051 and \c STM8.

    \endlist

    \section1 Redetecting Compilers

    When \QC finds an x86_64 GCC compiler, it sets up an instance for the native
    x86_64 target. If you plan to create also 32-bit x86 binaries without using
    a dedicated cross-compiler, select \uicontrol {Auto-detection Settings} >
    \uicontrol {Detect x86_64 GCC compilers as x86_64 and x86}. Then select
    \uicontrol Re-detect to refresh the list of automatically detected
    compilers.

    To remove manually added compilers, select \uicontrol Remove or
    \uicontrol {Remove All}.

    \section1 Specifying Compiler Settings

    To build an application using GCC, MinGW, Clang, or QCC, specify the path
    to the directory where the compiler is located and select
    the application binary interface (ABI) version from the list of available
    versions. You can also create a custom ABI definition.
    For QCC, also specify the path to the QNX Software Development Platform (SDP).

    To enable Microsoft Visual C++ Compilers (MSVC) and clang-cl to find system
    headers, libraries, and the linker, \QC executes them inside a command
    prompt where the environment has been set up using \c {vcvarsall.bat}. For
    these compilers, you also specify the path to the script that sets up the
    command prompt.

    You specify the compiler to use for each kit in \uicontrol Tools >
    \uicontrol Options > \uicontrol Kits.

    To add C or C++ compilers:

    \list 1

        \li Select \uicontrol Tools > \uicontrol Options >
            \uicontrol Kits > \uicontrol Compilers > \uicontrol Add,
            then select a compiler in the list, and then select \uicontrol C or
            \uicontrol C++ to add a C or C++ compiler.

            To clone the selected compiler, select \uicontrol Clone.

        \li In the \uicontrol Name field, enter a name for the compiler to
            identify it in \QC.

        \li In the \uicontrol {Compiler path} field, enter the path to the
            directory where the compiler is located.

        \li In the \uicontrol {Platform codegen flags} field, check the flags passed
            to the compiler that specify the architecture on the target
            platform.

        \li In the \uicontrol {Platform linker flags} field, check the flags passed to
            the linker that specify the architecture on the target platform.
            The linker flags are used only when building with Qbs.

            The other settings to specify depend on the compiler.

        \li In the \uicontrol ABI field, provide an identification for the
            target architecture. This is used to warn about ABI mismatches
            within the kits.

    \endlist

    \section1 Adding Nim Compilers

    To build an application using the Nim Compiler, select \uicontrol Tools >
    \uicontrol Options > \uicontrol Kits > \uicontrol Compilers >
    \uicontrol Add > \uicontrol Nim, and specify the path to the directory where
    the compiler is located.

    \section1 Adding Custom Compilers

    To add a compiler that is not listed above or a remote compiler, use the
    \uicontrol Custom option and specify the paths to the directories where the
    compiler and make tool are located and options for the compiler.

    \image creator-compilers-custom.png

    To add other compilers:

    \list 1

        \li Select \uicontrol Tools > \uicontrol Options > \uicontrol Kits >
            \uicontrol Compilers > \uicontrol Add > \uicontrol Custom >
            \uicontrol C or \uicontrol C++.

        \li In the \uicontrol Name field, enter a name for the compiler.

        \li In the \uicontrol {Compiler path} field, enter the path to the directory
            where the compiler is located.

        \li In the \uicontrol {Make path} field, enter the path to the directory where
            the make tool is located.

       \li  In the \uicontrol ABI field, specify the ABI version.

        \li In the \uicontrol {Predefined macros} field, specify the macros that the
            compiler enables by default. Specify each macro on a separate line,
            in the following format: MACRO[=value].

        \li In the \uicontrol {Header paths} field, specify the paths to directories
            that the compiler checks for headers. Specify each path on a
            separate line.

        \li In the \uicontrol {C++11 flags} field, specify the flags that turn on
            C++11 support in the compiler.

        \li In the \uicontrol {Qt mkspecs} field, specify the path to the directory
            where mkspecs are located. Usually, the path is specified relative
            to the Qt mkspecs directory.

        \li In the \uicontrol {Error parser} field, select the error parser to use.
            Select \uicontrol Custom, and then select \uicontrol {Customer Parser Settings}
            to specify settings for a custom parser:

            \image qtcreator-custom-parser.png

            The custom error parser enables you to capture errors and warnings separately.
            You can configure the error parser in the \uicontrol Error tab and the warning
            parser in the \uicontrol Warning tab:

            \list 1

                \li In the \uicontrol {Error message capture pattern} field, specify
                    a regular expression to define what is an error. The custom
                    parser matches the compile output line by line against the
                    regular expression and displays errors in the \uicontrol Issues
                    output pane. Create regular expression groups that contain
                    the file name, line number and error message.

                \li In the \uicontrol {Capture Positions} field, map the regular
                    expression groups to \uicontrol {File name}, \uicontrol {Line number},
                    and \uicontrol Message.

                \li In the \uicontrol {Capture Output Channels} field, specify whether
                    messages from standard output, standard error, or both channels
                    should be captured.

                \li In the \uicontrol {Test} group, you can test how the message that
                    you enter in the \uicontrol {Error message} field is matched when
                    using the current settings.

            \endlist

    \endlist

    \section1 Troubleshooting MinGW Compilation Errors

    If error messages displayed in the \uicontrol {Compile Output} pane contain
    paths where slashes are missing (for example, \c {C:QtSDK}),
    check your PATH variable. At the command line, enter the following commands:

    \code
        where sh.exe
        where make.exe
        where mingw32-make.exe
    \endcode

    If these commands show paths, they have been added to the global PATH
    variable during the installation of a tool chain based on Cygwin or MinGW,
    even though this is against Windows conventions.

    To keep working with the third-party tool chain, create a new shell link
    that adds the required paths (as Visual Studio and Qt do). The shell link
    must point to cmd.exe, as illustrated by the following example:

    \c {C:\Windows\System32\cmd.exe /K C:\path_to\myenv.bat}

    where the /K parameter carries out the command specified in the bat file.

    Create the myenv.bat file at \e path_to, which should be in a convenient
    location. In the file, specify the paths to the tool chains. For example,

    \c  {set PATH=C:\path1;C:\path2;%PATH%}

    where \e path1 and \e path2 are paths to the tool chains.

    Finally, remove the paths from the global PATH, reboot the computer, and
    run the \c where commands again to verify that the global PATH is now clean.

    You can use the shell link to run the tools in the third-party tool chains.

*/
